← Back

VS-1

Video/SPDIF/Audio Sensor for Home Automation

Home automation systems require that you know if a piece of equipment is on or off in order to control it. Recent changes in cable boxes have removed the switch AC outlet, which makes things difficult.

We developed, tested and sell a sensor that detects the presence of digital audio, composite video, or component video.

The model VS-1 sensor is a video or S/PDIF sensor for use with home automation system to provide a means of sensing the power state of AV sources that do not have discrete power commands.

LED indicators give a visual indication of power (red) and if a signal (green) is present.

The VS-1 incorporates a microprocessor that analyzes the input signal and eliminates the need for drift prone adjustment pots.

The output is a relay contact to provide ground isolation between the AV source and the control system. The contact closes when the signal is present.

Also, audio signals maybe sensed by moving a jumper shunt inside the VS-1. There are clear instructions in the operating manual that is included.

The VS-1 has a high input impedance with a loop through RCA jack so that it can be inserted in the signal path without signal degradation.

The VS-1 is powered by a 9V power supply, you can use your own or purchased one from us at an additional $15.00.